1998 Passport Royal Passport 41

With the introduction of the Royal Passport 41 we are able to offer our clients the same uncompromising quality and performance as the larger Royal Passport models, in a size and price range that appeals to the serious cruising couple. Recognizing that designing and building a yacht to surpass its predecessor, the popular Passport 40, would not be an easy task, we began by improving upon those assets which set the Passports apart. Starting with the best use of interior volume, superior joinery, durable construction and ease of handling, we then designed her to be a lighter and faster yacht with more sail area and a longer waterline for better performance. The hull form of the 41 features a generous beam at the waterline for stability. The short overhang bow is subtly flared to keep the boat dry in waves. The beam is carried well forward for good reaching speeds, so essential in offshore yachts. We specified only the best materials in her construction, from the resins and glass to the plumbing and wiring. Then we outfitted her with well-known and durable equipment and gear. Lastly, we made her affordable.

• Yanmar 4 cylinder 4JH2-BE 50 B.H.P. marine diesel engine with 2.14:1 gear reduction ratio and down angle transmission. 
• Flexible engine mounts. - Full gauges and engine alarm system. -
• Coast Guard approved fuel lines with Racor 500 FG fuel filter. 
• Lead foam insulated engine room. 
• 12 volt exhaust fan for engine room. 
• Raw water strainer for engine. 
• Stainless steel antisyphon valve.
• Muffler - waterlock system. 
• Custom shaft strut with cutlass bearing.
• 1-1-4" stainless steel prop shaft with three blade bronze propeller. 
• Custom bronze stuffing box. 
• Single fuel tank with baffles (second fuel tank is available as an option). 
• Edson pedestal steering system with dual lever controls. 
• Stainless steel "destroyer" type steering wheel. 
• Emergency steering system with custom made tiller. 
• Rudder shaft packing glad and rubber bearing.
• Bronze rudder shoe.

• Custom Forespar double spreader mast configured for cutter rig.
• Tapered airfoil section aluminum spreaders.
• Four halyards: main, genoa, staysail and spinnaker, all led internally.
• Internally led topping lift 
• spare main halyard. 
• Internally led outhaul and reef lines. 
• Flag halyards at spreaders. 
• Mast head tricolor and anchor light.
• Combination deck and steaming light. 
• Masthead mounted windex. 
• 16 stainless steel rigging with Sta-lock fittings. 
• Removable inner forestay with Highfield lever and storage system.
• Harken or equivalent furling system for headstay.

•  Newmar ES-4 electrical panels with circuit breakers and meters. 
• 110V - 220V shore power system 
• Guest battery selector switch. 
• 4 x 12V fans in galley, main saloon and over berths. 
• Bicolor bow light and stern light. 
• Interior courtesy lights 
• Overhead lights and one engine room light.
• Bulkhead reading lights. 
• Fluorescent lights.
• Engine room and lazarette lights. 
• Dual function chart table light. 
• One Zinc, ZAP B - 1. 
• Electrical wiring conduit. 
• 9 x 110V outlets. 
• Two ground fault interrupters: one in head, one in the galley. 
• Internal bonding system to all chain plates, thru hulls, engine and rudder system, connected to ZAP Zinc. 
• 40 amp three bank battery charger. 
• 2 x 12 volt 4-D marine gel batteries.

• North Sails or equivalent furling mainsail with two reef points
• North Sails or equivalent 135% furling Genoa with sun shade
• North Sails or equivalent heavy weather staysail
• Mainsail cover

• Four Lewmar Ocean Series hatches: 2 x #70, 2 x #20. 
• 2 Lewmar Size II 12' aluminum genoa tracks. 
• 2 Lewmar Size I 2' aluminum staysail tracks. 
• Lewmar Traveler Track Size II with end stops and line hardware. 
• Lewmar Ocean Series ball bearing traveler system with control lines and hardware. 
• 2 Lewmar #8334 foot blocks. 
• 2 Lewmar #2910-3014 triple rope clutches. 
• 2 Lewmar #2913-9104 deck organizers. 
• Stainless steel deck tang for inner forestay. 
• 4 x 316 stainless steel pad eyes in bulwarks, 2 on stern,2 amidships.
• Custom double bow roller 
• stem head fitting. - Teak cap rail. 
• 6 x 316 stainless steel fairleads. 
• 8 x 316 stainless steel cleats. 
• 3 x 8" 316 stainless steel cleats. 
• Bow and stern pulpit with custom bases. 
• 316 stainless steel stanchions with custom bases. 
• Double life lines and four 4 x 316 S-S double stanchions for boarding gates. 
• 316 stainless steel hand rails on cabin house. 
• Custom 316 stainless steel companionway sliding hatch with Lexan insert. 
• Teak doors and Lexan drop boards. 
• 316 stainless steel boarding ladder built into stem rail. 
• Reverse transom with swim platform. 
• 2 Hood 4" cowl vents. 
• Dorade Guards 
• 1" 316 stainless steel tubing. 
• Fuel and water deck fills.
• 4 x 316 stainless steel deck drains. 
• 4 x 316 stainless steel cockpit drains. 
• Hood stainless steel opening port lights with screens. 
• 4 fixed ports w- stainless steel bezels (custom). 
• 316 stainless steel mast collar. 
• 2 molded-in coaming compartments with Lexan doors. 
• Teak cockpit sole. 
• Additional lift-out bin on starboard side of cockpit 
• Fiberglass molded propane storage compartment for two 20 pound tanks with overboard venting 
• 316 stainless steel emergency tiller cap. 
• Autopilot FRP box mounted in cockpit lazarette.

All winches are Lewmar Ocean Series self tailing:

• 2 Speed Lewmar #58 CST,
• 2 Speed Lewmar #44 CST,
• 2 Speed Lewmar #40 CST,
• Single - Speed Lewmar #16 CST. 

• 2 stainless steel water tanks with baffles, 120 gal capacity
• 8 gallon hot water heater 110 volt and engine driven.
• Hot and cold pressure water system. 
• Flojet self priming fresh water pump 
• Groco accumulator tank. 
• Hot and cold pressure water faucets in galley and head. 
• Whale or equivalent cockpit hot and cold pressure water shower.
• Two galley foot pumps salt and fresh water. 
• Large 70% - 30% stainless steel galley sinks. 
• Large head with showers and stainless steel sink. 
• Rule automatic shower sump pump with overboard discharge.
• Groco Model K manual head. 
• Large holding tank with piping for waste disposal. 
• Bronze ball cock type thru hull fittings bonded to ships system. 
• Rule 3500 electric 12 volt bilge pump with automatic float switch.
• Manual bilge pump located in cockpit.

•  Custom 316 stainless steel double bow roller-stem head fitting. 
• 45 lb.. plow anchor with 240ft chain. 
• Lewmar "Concept 1" electric windlass with dual controls. 
• Divided chain locker. 

• Standard two stateroom, one head layout in either berth forward or head forward arrangement. 
• Custom interiors are available on request. 
• All bulkheads of marine grade plywood with compression fillets against the hull sides.
•  Teak veneer and solid teak trim on all interior bulkheads and cabinetry. 
• Teak beveled cabin doors with louvers. 
• Teak louvered doors on all lockers. - Custom teak navigation station with opening chart table top. 
• Teak ceilings on exposed hull sides. 
• Teak handrails, port and starboard. 
• Removable Formica overhead with teak battens. 
• Solid teak and holly cabin sole. 
• Numerous removable floor boards with stainless steel hardware. 
• Chrome hardware on all lockers, doors and cabinets.
• Formica counter tops in galley and heads. 
• Medicine cabinet in the head. 
• Five coats of hand rubbed satin varnish on all teak surfaces. 
• Deluxe contoured cushions covered in marine quality fabric.

•  Poured foam insulated refrigerator and freezer compartments with top and front opening doors. 
• Three burner stainless steel propane stove with oven.
• Stainless steel lined stove alcove. 
• Stainless steel stove safety bar. 
• Safety LPG panel with solenoid. 
• Two aluminum propane tanks. 
• Built-in microwave oven. 
• Custom deep double stainless steel sinks. 
• Salt and fresh water foot pumps. 
• Trash bin. 
• Numerous drawers, lockers and dry storage bins

• Cutter rigged with removable inner forestay with "Bulletproof" 100% hank on jib
• New mainsail and cover 2021
• Dutchman Sail Flaking System on mainsail
• 15ft diameter parachute sea anchor. 20ft of chain spliced to 400ft of line (unused)
• Rudder bearing resealed 2020
• Switlick 6 person offshore life raft
• 12-volt refrigeration unit to supplement engine driven Sea Frost system
• Replaced Sea Frost refrigerator compressor 2019
• Kiss wind generator with spare blades
• Replaced anchor windless moto and gear box 2021
• Spare parts: refurbished water pump, starter motor, refurbish macerator pump, three blade propeller with prop puller, various size tubing
• Eight foot "flexboat" inflatable dinghy with 3.3 HP Mercury outboard motor and removable stern mounted engine hoist
• Cruising spinnaker
• Electric winch on starboard side of roof cabin
• Icom M700PRO single side band radio with backstay antenna.  Marine and ham bands both enabled. SCS Pactor IIe modem for computer access to radio. Antenna tuner under tub in starboard aft lazarette.
• NAXA 12 volt television
• Carbon monoxide detector
• Auxiliary low pressure fuel pump in port side lazarette
• EPIRB
• Standard Horizon VHF radio with AID receiver
• Autoprop propeller with prop puller
• Balmar high output alternator with ARS-5 voltage regulator
• 153% light air deck sweeper genoa (needs some repair)
• New radar scanner and display installed 2022
• "Offshore sea head", in aft cabin
• Spare toilet head
• Custom made V bunk mattress
• Custom made V bunk sheets
• Large Fortress anchor
• 2 Scuba tanks 
• Full complement of electrical spares
• Full complement of plumbing spares
• Full selection of hardware
• Full complement of engine spares including spare starter
• Full complement of sailing hardware spares